Toxic Chemicals Safety Datasheets HAZCHEM Sign

Hazardous Chemical Sign – Toxic Chemicals Safety Datasheets HAZCHEM Sign

Toxic Chemicals Safety Datasheets HAZCHEM Sign – The message “HAZCHEM Toxic Hazardous Chemicals Are Used In This Workplace. Safety Datasheets Are Available in Supervisor’s Office.” provides important safety information to workers and visitors in a facility, especially in a dairy shed or any environment where hazardous chemicals are handled. Here’s why each part of the message is essential:

HAZCHEM Toxic Hazardous Chemicals Are Used in This Workplace:

This alerts workers to the fact that hazardous chemicals are present in the workplace, which could include substances that are toxic, flammable, corrosive, or reactive. Knowing this helps workers be more cautious, follow safety protocols, and be aware of potential risks like spills, leaks, or accidents.

Safety Datasheets Are Available in Supervisor’s Office:

Safety datasheets (or Safety Data Sheets, SDS) contain critical information about the chemicals being used in the workplace, such as:

• Chemical properties and hazards
• Precautionary measures for safe handling
• Emergency procedures in case of exposure, spills, or fires
• First aid instructions

By having these datasheets accessible in the supervisor’s office, workers are assured that they can easily reference this essential information when needed. It helps ensure that everyone is well-informed on how to safely handle and respond to hazardous chemicals.

Benefits of this Signage:

• Promotes Safety Awareness: The sign raises awareness about the presence of toxic chemicals and encourages workers to familiarize themselves with the necessary safety measures.
• Helps Prevent Accidents: The availability of safety datasheets ensures that immediate actions can be taken in an emergency, reducing the likelihood of harm.
• Legal Compliance: This type of warning and availability of SDS helps the workplace comply with occupational health and safety regulations that require hazardous chemicals to be properly labeled and accessible.

FAQs

Q1. Why do I need a Toxic Chemicals Safety Datasheets HAZCHEM Sign?
It reminds staff and emergency responders where safety datasheet information is located and ensures compliance with WorkSafe NZ requirements.

Q2. Where should it be placed?
Install near chemical storage areas, MSDS folders, or containers holding toxic materials in labs, warehouses, or transport facilities.

Q3. Can I add my company logo or change the wording?
Yes — custom designs are available for a $25 setup fee. We can add your logo or change text to match your safety manual.

How to choose the right mounting options.

Corflute: short-term term less than 2 years outdoors

Thin PVC: Medium term, more than 2 years

ACM: Long term 5 years or more

Supplied as a sticker:

long-term digital print laminated for long-term use. With a life of 5 years or more. We use a Hi Tac vinyl which allows it to be applied to most surfaces.

Magnetic mounting option for the Toxic Chemicals Safety Datasheets HAZCHEM Sign

Flexible, vehicle-grade magnetic placards with the Toxic Chemicals Safety Datasheets HAZCHEM Sign printed on premium vinyl, laminated, and mounted to automotive magnetic sheeting. They stick to ferrous steel panels and remove without residue—ideal for vehicles that only carry DG sometimes.

Who they’re for

• Contractors / couriers who transport Dangerous Goods occasionally

• Hire or multi-use vehicles (no permanent signage)

• Sites that swap classes depending on load (quick changeover)

• Magnet: vehicle-grade sheet, 0.8–1.0 mm thick (30–40 mil), high-energy.

• Face film: outdoor self-adhesive vinyl + UV laminate (gloss).

• Operating temp: suitable from winter cold to summer heat (typical automotive range).

Where they work (and don’t)

• Works on: painted steel panels that are flat, clean, and smooth.

• Doesn’t work on: aluminium, stainless, plastics, composites, heavy body filler; vinyl wraps, ceramic coatings, heavily textured paint.

• If customers have aluminium doors/ute trays, suggest self-adhesive or rigid ACM instead.

Fitment checklist

1. Clean & dry the panel (no wax/polish).

2. Warm, flat magnet—no curl.

3. Apply to flat steel only; press from centre out.

4. Do not bridge panel gaps, ribs or sharp curves.

5. Remove daily to clean/dry both surfaces; store flat.

6. In heavy rain/highway speeds, check edges haven’t lifted.

Care & maintenance

• Remove and wipe after wet weather; store flat (never rolled tight).

• Move position slightly each week to avoid differential fading.

• Avoid use on freshly resprayed paint (allow full cure).

Compliance note

• Magnet is a mounting method. The operator must ensure placards are the correct class, size, and securely affixed for the journey. Some carriers or site rules may require permanent/rigid placards—check your procedure.

For more information check out these links

• WorkSafe NZ – Hazardous Substances Management
  👉 WorkSafe NZ – Hazardous substances

• EPA NZ – HSNO Act guidance
  👉 EPA NZ – Hazardous Substances and New Organisms (HSNO) Act

• United Nations GHS
  👉 UN – Globally Harmonized System (GHS)  

• Why you need the correct Hazard sign

The mission of Hazard Signs NZ is to provide quality-made safety signs to all of New Zealand. Our great prices and convenient online ordering platform make us a preferred supplier to many NZ businesses. All our signs are designed and manufactured in Invercargill to meet the workplace health and safety needs of all businesses and industries in New Zealand.

Please note. We make some of our safety signs to order and it may take 5 to 10 business days to receive. If you require your order urgently, please don’t hesitate to contact us to confirm an estimated delivery date prior to placing your order.

If you are not sure about what sign you need for your business, just contact us at +6432183350 or email us and we will make it ready for you.