Class 3 Flammable Liquid Sign

Hazardous Sign – Class 3 Flammable Liquid Sign

Class 3 Flammable Liquid Sign – Flammable liquids such as Petrol, Hexane or Toluene are prone t0 readily ignite if subject to flames or another form of ignition. Therefore a ‘flammable liquid sign’ is a useful tool to help protect the health safety of personnel and the general public.  Place the ‘Class 3 Flammable Liquid Sign’n in areas where dangerous goods are transported and or stored. The ‘Class 3 Flammable Liquid Sign’ features a flame symbol above the words flammable liquid followed by a large, bold number 3. The ‘Flammable Liquid Sign’ comprises a red background with white wording and symbols. This is a mandatory sign which must be displayed where all CLASS 3 liquids are stored or transported.

Classifications:

Properties of hazardous substances have been classified to determine the best way the risks can be managed. They have been classified into eight key hazard classes:

•  1: Explosives.
•  2: Flammable gases.
•  3: Flammable liquids.
•  4: Flammable solids.
•  5: Oxidising substances.
•  6: Substances toxic to people.
•  8: Corrosive substances.
•  9: Substances toxic to the environment.

How to choose the right mounting options.

Corflute: short term less than 2 years outdoors

Thin PVC: Medium term, more than 2 years

ACM: Long term 5 years or more

Supplied as a sticker:

long term digital print laminated for long term use. With a life of 5 years or more. We use a Hi Tac vinyl which allows it to be applied most surfaces.

Magnetic mounting option for the Class 3 Flammable Liquid Sign

Flexible, vehicle-grade magnetic placards with the Class 3 Flammable Liquid Sign printed on premium vinyl, laminated, and mounted to automotive magnetic sheeting. They stick to ferrous steel panels and remove without residue—ideal for vehicles that only carry DG sometimes.

Who they’re for

• Contractors / couriers who transport Dangerous Goods occasionally

• Hire or multi-use vehicles (no permanent signage)

• Sites that swap classes depending on load (quick changeover)

• Size: 250 × 250 mm (meets common road minimums).

• Magnet: vehicle-grade sheet, 0.8–1.0 mm thick (30–40 mil), high-energy.

• Face film: outdoor self-adhesive vinyl + UV laminate (gloss).

• Operating temp: suitable from winter cold to summer heat (typical automotive range).

• Print: high-contrast red/white with artwork.

Where they work (and don’t)

• Works on: painted steel panels that are flat, clean, and smooth.

• Doesn’t work on: aluminium, stainless, plastics, composites, heavy body filler; vinyl wraps, ceramic coatings, heavily textured paint.

• If customers have aluminium doors/ute trays, suggest self-adhesive or rigid ACM instead.

Fitment checklist

1. Clean & dry the panel (no wax/polish).

2. Warm, flat magnet—no curl.

3. Apply to flat steel only; press from centre out.

4. Do not bridge panel gaps, ribs or sharp curves.

5. Remove daily to clean/dry both surfaces; store flat.

6. In heavy rain/highway speeds, check edges haven’t lifted.

Care & maintenance

• Remove and wipe after wet weather; store flat (never rolled tight).

• Move position slightly each week to avoid differential fading.

• Avoid use on freshly resprayed paint (allow full cure).

Compliance note

• Magnet is a mounting method. The operator must ensure placards are the correct class, size, and securely affixed for the journey. Some carriers or site rules may require permanent/rigid placards—check your procedure.

For more information check out these links

• WorkSafe NZ – Hazardous Substances Management
  👉 WorkSafe NZ – Hazardous substances

• EPA NZ – HSNO Act guidance
  👉 EPA NZ – Hazardous Substances and New Organisms (HSNO) Act

• United Nations GHS
  👉 UN – Globally Harmonized System (GHS)  

• Why you need the correct Hazard sign

Check out our: Complete Guide to Dangerous Goods Placards (NZ & AU)

Why you need the correct Hazard sign

NZS/AS 1319:1994 advocates simplicity and clarity in safety signage. To be effective, they should be easy to read and interpret at a glance.

The Standard is about the use of legible text and appropriate, simple symbols.

By simplifying the message, it reduces the risk of misinterpretation, which increases the chances of the sign’s warning or instruction being followed.

Enhancing the signs’ visibility through placement and colour

Placement and visibility will play a crucial role in the efficiency of safety signs.

The standard states that signs must be positioned near the hazard they are warning about, which ensures that the safety message is relevant. Also, it advocates the use of contrasting colours for the background and lettering. This attention to the colour scheme will increase visibility and readability from a reasonable distance, which ensures the message is accessible.

The mission of Hazard Signs NZ is to provide quality-made safety signs to all of New Zealand. Our great prices and convenient online ordering platform make us a preferred supplier to many NZ businesses. All our signs are designed and manufactured in Invercargill to meet the workplace health and safety needs of all businesses and industries in New Zealand.

Please note. We make some of our safety signs to order and it may take 5 to 10 business days to receive. If you require your order urgently, please don’t hesitate to contact us to confirm an estimated delivery date prior to placing your order.

If you are not sure about what sign you need for your business, just contact us at +6432183350 or email us and we will make it ready for you.